Hello

An area for greetings to (or from) NEW members of the Team and/or the Forum. Say "HELLO" here - no one will bite !!
Post Reply
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Hello

Post by UBT - Eric »

Hello

I've just joined your team and your forum, which seems to have some jolly banter and doesn't take itself too seriously...

I used to run SETI some time ago, but had issues with my PC's overheating and stuff.

I sorted all that out and now I'm back !!

I've got a few rigs which I'm bringing online, bit by bit. (I'm a closet PC junkie, so I've got a whole range of different machines that I fire up every once in a while....)

No doubt i'll speak to some of you at some point...
Image
UBT - mickyb69
Posts: 1655
Joined: Wed Sep 19, 2007 1:00 am

Post by UBT - mickyb69 »

Hi Eric ImageImage
UBT - bobuk
UBT Contributor
Posts: 3227
Joined: Wed Aug 23, 2006 1:00 am

Post by UBT - bobuk »

Imageto our team... may your stay be a long one. If you need any help just shout there will be always someone to give you a helping hand..   :)

bob   :D
Temujin
Posts: 2259
Joined: Mon Mar 13, 2006 12:00 am

Post by Temujin »

Welcome aboard Eric :wave:
melter65
Active UBT Contributor
Posts: 3873
Joined: Thu May 17, 2007 1:00 am

Post by melter65 »

Hello and Welcome! :D
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Post by UBT - Eric »

Hello everyone....!

Wow - I'm impressed....I've only been here a few minutes, trawling through your forum...and already my suspicions are confirmed...

You lot REALLY are friendly....

Thanks for your messages
Image
UBT-mark3346
Active UBT Contributor 15+ yrs
Posts: 7515
Joined: Wed May 03, 2006 1:00 am
Contact:

Post by UBT-mark3346 »

Welcome to the team :D
Image
Temujin
Posts: 2259
Joined: Mon Mar 13, 2006 12:00 am

Post by Temujin »

UBT - Eric wrote:You lot REALLY are friendly....
wait until you meet the frog  :wink:
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Post by UBT - Eric »

Temujin wrote:
UBT - Eric wrote:You lot REALLY are freindly....
wait until you meet the frog  :wink:
Hello

Thanks for the warning

But don't frogs only eat flies.....I'm only half a bee
Image
Joshrandom
Posts: 5602
Joined: Sat Jun 23, 2007 1:00 am

Post by Joshrandom »

Welcome Eric  :wave:
UBT - Mikee
Marvin the Dalek
Posts: 4399
Joined: Wed Mar 15, 2006 12:00 am
Location: North Wales

Post by UBT - Mikee »

How does it go?...

A one... two-- A one... two... three... four...
Half a bee, philosophically,
Must, ipso facto, half not be.
But half the bee has got to be
Vis a vis, its entity. D'you see?

But can a bee be said to be
Or not to be an entire bee
When half the bee is not a bee
Due to some ancient injury?

Singing...

La dee dee, one two three,
Eric the half a bee.
A B C D E F G,
Eric the half a bee.

Is this wretched demi-bee,
Half-asleep upon my knee,
Some freak from a menagerie?
No! It's Eric the half a bee!

Fiddle de dum, Fiddle de dee,
Eric the half a bee.
Ho ho ho, tee hee hee,
Eric the half a bee.

I love this hive, employee-ee,
Bisected accidentally,
One summer afternoon by me,
I love him carnally.

He loves him carnally,
Semi-carnally.
The end.

http://www.lyricsdepot.com/monty-python ... a-bee.html

Gonna be singing that song now all day!

Welcome to the team - your going to fit in just fine!
Last edited by UBT - Mikee on Wed Jan 02, 2008 3:43 pm, edited 1 time in total.
Follow us on Twitter... http://twitter.com/UKBOINCTeam

Image Image

Image
Sir Cracked of the Mind
KWSN team member
Posts: 783
Joined: Thu Sep 06, 2007 1:00 am

Post by Sir Cracked of the Mind »

After that, I'm just going to settle for Hi!

Oh! God I give up! Now it won't even let me delete them........
Last edited by Sir Cracked of the Mind on Wed Jan 02, 2008 8:41 am, edited 1 time in total.
UBT - Timbo
UBT Forum Admin
Posts: 9710
Joined: Mon Mar 13, 2006 12:00 am
Location: NW Midlands
Contact:

Post by UBT - Timbo »

Sir Cracked of the Mind wrote:After that, I'm just going to settle for Hi!

Oh! God I give up! Now it won't even let me delete them........
I've deleted the repeat messages for you !

regards

Tim
UBT - Terry
UBT Contributor
Posts: 556
Joined: Sun Jan 21, 2007 12:00 am

Post by UBT - Terry »

Hi Eric glad to have you aboard and most of us don't bite  :lol:


  Terry
UBT - Timbo
UBT Forum Admin
Posts: 9710
Joined: Mon Mar 13, 2006 12:00 am
Location: NW Midlands
Contact:

Post by UBT - Timbo »

Hi Eric,

Welcome...seems you've made a good choice :-) as you're already the User of the Day on TSP !!

Well done that man.

regards

Tim
Ben
Posts: 1387
Joined: Wed Dec 19, 2007 12:00 am

Post by Ben »

Hi Eric,

Welcome to the UK Crazy BOINC team.  :lol:  Enjoy the ride, and might see you on the UBT chat soon.  :)
UBT - The Prof....
Posts: 1630
Joined: Mon Nov 06, 2006 12:00 am

Post by UBT - The Prof.... »

Greetings and welcome to the mad house.... :!:
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Post by UBT - Eric »

Hello...again :)

After a long absence, I'm back :)

I did try and post a reply here earlier, but it seems it didn't get uploaded.

Not to worry.

I'll try my best to get involved in a few of the newer projects, as I wasn't so keen on some of the original projects....

Hopefully I can make a little difference.
Image
Woodles
UBT Contributor
Posts: 11757
Joined: Thu Dec 20, 2007 12:00 am
Location: Cambridgeshire

Post by Woodles »

UBT - Eric wrote:Hello...again :)

After a long absence, I'm back :)

I did try and post a reply here earlier, but it seems it didn't get uploaded.

Not to worry.

I'll try my best to get involved in a few of the newer projects, as I wasn't so keen on some of the original projects....

Hopefully I can make a little difference.
Hi Eric,

Welcome back :)

Crunch whatever you like and feel is worthwhile, we don't judge fellow crunchers (in public anyway :D)

Mark
Image
UBT - Chris
Active UBT Contributor 5+ yrs
Posts: 600
Joined: Tue Nov 05, 2013 12:00 am

Post by UBT - Chris »

Hello, Eric - nice to meet you! :D
'UBT - Chris' is my old name - I now crunch as 'CaffeinatedSloth' but I'm still 100% UBT :D
Image
Image
UBT - Chris
Active UBT Contributor 5+ yrs
Posts: 600
Joined: Tue Nov 05, 2013 12:00 am

Post by UBT - Chris »

Hi, Eric - I created (and maintain to the best of my ability) a list of active projects - http://forum.ukboincteam.com/viewtopic. ... highlight=, so you can add whatever takes your fancy :D
'UBT - Chris' is my old name - I now crunch as 'CaffeinatedSloth' but I'm still 100% UBT :D
Image
Image
Joshrandom
Posts: 5602
Joined: Sat Jun 23, 2007 1:00 am

Post by Joshrandom »

Welcome back Eric  :wave:
rich2000k
UBT Contributor
Posts: 107
Joined: Sun Dec 15, 2013 12:00 am
Location: Staffordshire

Post by rich2000k »

Welcome to the team Eric, we're all a good bunch (I think at least).

Have fun!
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Post by UBT - Eric »

UBT - Chris wrote:Hi, Eric - I created (and maintain to the best of my ability) a list of active projects - http://forum.ukboincteam.com/viewtopic. ... highlight=, so you can add whatever takes your fancy :D
Hello Chris

Thanks for the link and advice.

My problem is that my laptop cannot really be used for normal BOINC projects as it is very underpowered, compared to what you can buy today.

I'm therefore restricted in what other projects can be run....whereas for Bitcoin, all the work is done by this separate R-Box and so I can use my laptop as normal and I can help UBT a little bit.

Thanks for the suggestion.
Image
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Post by UBT - Eric »

Joshrandom wrote:Welcome back Eric  :wave:
Hello and thanks for the welcome - it's been a while since I was last active on here.
Image
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Post by UBT - Eric »

rich2000k wrote:Welcome to the team Eric, we're all a good bunch (I think at least).

Have fun!
Hello rich2000k and thank you for the welcome. I certainly hope to be able to have a bit of fun while I can. It's what life is all about, isn't it?
Image
UBT - Chris
Active UBT Contributor 5+ yrs
Posts: 600
Joined: Tue Nov 05, 2013 12:00 am

Post by UBT - Chris »

No problem, Eric - it is there incase you ever need it, whenever that may be :D
'UBT - Chris' is my old name - I now crunch as 'CaffeinatedSloth' but I'm still 100% UBT :D
Image
Image
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Post by UBT - Eric »

Hello,

I've at last got my laptop sorted out....just a question now of whether my contribution is of any use....as I see that we might soon to be taking over as #1 team again :)

...and only 594 forum messages for me to read and catch up on ;)
Image
UBT - Mikee
Marvin the Dalek
Posts: 4399
Joined: Wed Mar 15, 2006 12:00 am
Location: North Wales

Post by UBT - Mikee »

Welcome back!

I noticed you had some credits on Johns stats site today.

Not sure about overtaking TSBT anytime soon though - we seem to be just keeping pace with them at the moment - still anything you can do will help.

Mike
Follow us on Twitter... http://twitter.com/UKBOINCTeam

Image Image

Image
Woodles
UBT Contributor
Posts: 11757
Joined: Thu Dec 20, 2007 12:00 am
Location: Cambridgeshire

Post by Woodles »

Welcome back Eric :) Now get started on reading all the forum posts, you're sure to have missed a few gems! :D

Every contribution is useful, not just to the team but to the projects themselves.

Just a brief pause until Tim gets back to crunching full time, then it should be a couple of weeks to move back to UK #1 ... hopefully!

Mark
Image
UBT - Timbo
UBT Forum Admin
Posts: 9710
Joined: Mon Mar 13, 2006 12:00 am
Location: NW Midlands
Contact:

Post by UBT - Timbo »

UBT - Eric wrote:Hello,

I've at last got my laptop sorted out....just a question now of whether my contribution is of any use....as I see that we might soon to be taking over as #1 team again :)

...and only 594 forum messages for me to read and catch up on ;)
Hi Eric

I'm away on business, (and hence my posts this week will be somewhat irregular) but nice to see you are back - glad you got the laptop fixed :)

regards
Tim
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Post by UBT - Eric »

Hello

I've been lucky enough to be given a new piece of Bitcoin mining hardware, which a friend of mine had and he had no more use for....

I think he got bored with it not earning him millions of dollars overnight plus he might have seen his recent electricity bill ;)

So, I've now been given it....it's hopefully going to double my output :)

Will see in the next few days what sort of improvement it makes.
Image
UBT - Mikee
Marvin the Dalek
Posts: 4399
Joined: Wed Mar 15, 2006 12:00 am
Location: North Wales

Post by UBT - Mikee »

Sounds cool - what did he give you or is it a secret?
Follow us on Twitter... http://twitter.com/UKBOINCTeam

Image Image

Image
Woodles
UBT Contributor
Posts: 11757
Joined: Thu Dec 20, 2007 12:00 am
Location: Cambridgeshire

Post by Woodles »

UBT - Eric wrote:Hello

I've been lucky enough to be given a new piece of Bitcoin mining hardware, which a friend of mine had and he had no more use for....
Hi Eric, like to share what you got? :D
UBT - Eric wrote:I think he got bored with it not earning him millions of dollars overnight plus he might have seen his recent electricity bill ;)
It can come as a bit of a shock if you haven't worked it out in advance :)
UBT - Eric wrote:So, I've now been given it....it's hopefully going to double my output :)

Will see in the next few days what sort of improvement it makes.
UBT - Mikee wrote:Sounds cool - what did he give you or is it a secret?
If it's going to 'double your output' I'm guessing at either an R100 or BFL60 :)

Mark
Image
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Post by UBT - Eric »

UBT - Mikee wrote:Sounds cool - what did he give you or is it a secret?
It's not a secret...so I'm happy to share.

It's a "NEW R-Box" and it is sitting alongside a pair of the original R-Box devices.

I've spoken to my friend about BOINC too and he is quite interested in getting involved so you might gain an extra member soon.
Image
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Post by UBT - Eric »

Woodles wrote:
UBT - Eric wrote:Hello

I've been lucky enough to be given a new piece of Bitcoin mining hardware, which a friend of mine had and he had no more use for....
Hi Eric, like to share what you got? :D
UBT - Eric wrote:I think he got bored with it not earning him millions of dollars overnight plus he might have seen his recent electricity bill ;)
It can come as a bit of a shock if you haven't worked it out in advance :)
UBT - Eric wrote:So, I've now been given it....it's hopefully going to double my output :)

Will see in the next few days what sort of improvement it makes.
UBT - Mikee wrote:Sounds cool - what did he give you or is it a secret?
If it's going to 'double your output' I'm guessing at either an R100 or BFL60 :)

Mark
I've got a "NEW R-Box" - is that the same as a R100?

In a day or two's time, I'll see if it's made much difference - I hope it will have otherwise, I'll give it back to him.
Image
Woodles
UBT Contributor
Posts: 11757
Joined: Thu Dec 20, 2007 12:00 am
Location: Cambridgeshire

Post by Woodles »

Hi Eric,

If it's one of these http://www.amazon.co.uk/NEW-Rockminer-R ... B00NFQEHE6 then it's the one I was thinking of.

What do you have at the moment? Two of these http://www.amazon.com/RockMiner-R-BOX-S ... B00KLQHSM6? If so, it should more than double your output!  :D

The more the merrier as far as your friend is concerned, we don't bite here  :wink:

Mark
Image
UBT - Eric
UBT Contributor
Posts: 30
Joined: Tue Jan 01, 2008 12:00 am
Contact:

Re: Hello

Post by UBT - Eric »

It's been a while since I last "popped in" - and when I visited the website earlier, it was shut :( I thought you lot had all gone away...

Luckily, my eyes aren't that bad and I spotted the new website link, so you've moved home ?

(Though it wasn't an actual link - I had to make my fingers work and make sure I typed it in OK).

So, here I am... :)

I must say, I like the look of the new forum...so, well done to all concerned for giving it a new breath of life.

I'll have a bit of a wander around and if anything takes my fancy, I might just say something else...but don't count on it being Shakespearean in content or style ;)
hgblade
Posts: 28463
Joined: Fri Jan 04, 2008 12:00 am

Re: Hello

Post by hgblade »

Hi Eric

Good to see you again - glad you found our new home!
Image
Post Reply